SunSynk 8kW User Manual

Website: www.sunsynk.com E-mail: sales@globaltech-china.com
47
6.5. AUXILIARY / SMART LOAD
The Auxiliary Load Function can be set by clicking on the ‘Aux Load’ icon on the settings page.
This is a wonderful feature when the batteries are fully charged and the inverter is still producing energy
from the PV. By ticking the ‘Aux Load Output’ you can divert the power to your water heater, air-conditioner,
or another auxiliary load.
Figure 43 - Aux load in use.
On this page, you can also use the Input for Microinverters and set them with Zero Export. Even if the
inverter is Off-Grid/Island mode, you can still use my converters up to a maximum of 4kW extra on the 8.8kW
unit.
Figure 44 - Aux load diagram.
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com
Sunsynk.com
Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com

SunSynk 8kW Specifications

General

Rated Power	8kW
Max. DC Voltage	500V
Number of MPPTs	2
Max Output Current	35A
Max Efficiency	97.6%
Battery Voltage	48V
Max Charging Current	190A
Max Discharging Current	190A
Frequency	50/60Hz
Max PV Input	10400W
Operating Temperature	-25°C to 60°C
Protection Rating	IP65
Max DC Input Voltage	500V
Max Input Current	22A
Nominal AC Voltage	230V
Communication	RS485
Protection	Overload Protection
Cooling	Fan