Name: SunSynk 8kW
Brand: SunSynk
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Website: www.sunsynk.com E-mail: sales@globaltech-china.com

can connect a generator onto the grid side. This can be used to charge the batteries and supply the load

when the batteries have a low charge and there is not enough sunshine to the PV supply loads to charge the

batteries. The auxiliary input ‘GEN/AUX’ can be used to connect a generator. Please refer to the section using

generators.

IMPORTANT:

When using inverters in parallel mode, the generator port cannot be used. The reason for this is because

the inverter reverses when charging the batteries.

If you have more than one inverter connected together, then it causes a huge problem when one inverter

reverses and the others do not. Therefore, if using multi inverters that can reverse in parallel, you must use

the Grid Input to charge the batteries from the generator.

When wiring your AC connections, you need to provide suitable changeover switches and correct rating

fuses. Please refer to the local electrical regulations.

Figure 19 - Complete system with protection devices.

3.4. INSTALLING THE CT COIL

A 1:2000 Current Transformer Coil (CT-coil) is used to control the power export or the import from the

grid. The CT-Coil is one of the most important parts of the Sunsynk Parity inverter. This device reduces the

power of the inverter to prevent feeding power to the grid. This feature is also known as ‘Zero Export’.

Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com

Sunsynk.com

Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com

Sunsynk.com

Questions and Answers:

Need help?

Do you have a question about the SunSynk 8kW and is the answer not in the manual?

SunSynk 8kW Specifications

General