Name: SunSynk 8kW
Brand: SunSynk
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Website: www.sunsynk.com E-mail: sales@globaltech-china.com

7.2. THREE-PHASE CONFIGURATION

The Sunsynk Hybrid Inverter can also be paralleled in a three-phase system with perfect phase rotation.

In this case, you need to have three masters, and all the others are slaves. DO NOT forget that each inverter

still needs its own unique MODBUS communication number.



Phase A: Master A and Slave A



Phase B: Master B and Slave B



Phase C: Master C and Slave C

Check if all inverters have the same operating system and the latest software version and are the same

model.

On the multi inverter page, select 'parallel' and choose the master, which is normally the central inverter.

Ensure that you have good quality communication cable between the inverters.

Set all the other inverters to be slaves

Each inverter needs its own unique MODBUS number.

Each inverter needs its own data logger.

You only need one CT coil, which is connected to the master.

All batteries are wired in parallel.

The master is the only one that communicates with the battery BMS.

Figure 56 - Six inverters paralleled.

Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com

Sunsynk.com

Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com

Sunsynk.com

Questions and Answers:

Need help?

Do you have a question about the SunSynk 8kW and is the answer not in the manual?

SunSynk 8kW Specifications

General