EasyManuals Logo

SunSynk 8kW User Manual

SunSynk 8kW
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Website: www.sunsynk.com E-mail: sales@globaltech-china.com
39
1) Select ‘Use Timer’ and then select ‘Charge Time - Maximum Charge Power’ and the percentage that the
user wants the battery to reach.
2) Select ‘Discharge Time - Maximum Discharge Power,’ and the maximum depth you allow the battery to
go to. Do not touch any boxes at this point.
3) As you are not exporting any power, tick 'Zero Export'.
4) Zero Export Power’ is a small trickle power that will come from the grid to prevent any export.
5) The ‘Maximum Sell Power’ is, in fact, the maximum power of the inverter.
6.2. ON-GRID WITH UPS
There are two options: you can either use a single inverter or two inverters, depending on how stable you
want the power to be. The simplest form is using a single or multi-inverter system.
Most of the time, the supply is coming directly from the grid. But, when the grid fails, it will automatically
switch over to battery even though there is a very short delay of milliseconds for this switching.
In this application, all the power is provided to the load from the grid. Except, if there is a grid failure. In a
simple form: the 'GRID' is the input 'LOAD' is the output.
IMPORTANT:
Unlike the AC coupled application, your power is limited to the maximum power of the inverter. Ensure
that the inverter rating matches your load.
PROGRAMMING:
The programming is still very simple:
1) Basic Setup: set up your time and date, the company name, and language.
2) Battery Setup: set up your battery type. Ensure that you have communication if you are using a lithium
battery. Also, be sure you click the Grid on the Battery Set Up, and set your Battery Charging Current
according to the type of battery you are using. Generally, if you are using a lithium battery with
communication cables to the BMS, it will be automatically set for you.
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com
Sunsynk.com
Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com
Sunsynk.com Sunsynk.com
Sunsynk.com
Sunsynk.com

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SunSynk 8kW and is the answer not in the manual?

SunSynk 8kW Specifications

General IconGeneral
Rated Power8kW
Max. DC Voltage500V
Number of MPPTs2
Max Output Current35A
Max Efficiency97.6%
Battery Voltage48V
Max Charging Current190A
Max Discharging Current190A
Frequency50/60Hz
Max PV Input10400W
Operating Temperature-25°C to 60°C
Protection RatingIP65
Max DC Input Voltage500V
Max Input Current22A
Nominal AC Voltage230V
CommunicationRS485
ProtectionOverload Protection
CoolingFan

Related product manuals