Name: SunSynk 8kW
Brand: SunSynk
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Website: www.sunsynk.com E-mail: sales@globaltech-china.com

then the generator may slow down when switching in. This causes a frequency shift that will shut the

inverter down, which can be very inconvenient as it will happen repeatedly.

In order to help the generator on a sudden surge current, the Sunsynk inverter steps up the charge current

to the battery. At this point it will be providing the full load on switchover.

If your generator is not powerful enough to supply the full load and handle surges, you could choose to

use a separate battery charger, charging the batteries directly. We often recommend using a second inverter

or a standalone inverter in battery charge mode. This inverter will be connected in parallel on the battery bus

bar only to charge the battery when required or assist the battery charging. It is not connected in parallel with

other inverters; this inverter is only connected to the battery. But, the MPPT of this inverter can still be used

for charging.

Figure 39 - Example of two working inverters and a charger inverter.

The generator relay on the inverter can

automatically start a generator. However,

the generator must have a suitable A/T/S.

Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com

Sunsynk.com

Sunsynk.com Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com Sunsynk.com

Sunsynk.com Sunsynk.com

Sunsynk.com

Questions and Answers:

Need help?

Do you have a question about the SunSynk 8kW and is the answer not in the manual?

SunSynk 8kW Specifications

General