OPERATION & MAINTENANCE MANUAL SWE155F
1.1.2 Safety Labels Instructions
(1) Safety Operation Label
Please read all safety precautions carefully written in
labels and all information concerning safety, prior to
operate machine.
Maintenance frequently and replace safety label if
required. In case that safety labels or manual are
damaged or lost, you can place an order with our
distributors. The procedure of ordering them is
identical with that of the other parts and components.
You must specify model of the machine when
ordering.
Use only trained and qualified personnel to operate
this machine. Follow all safety precautions and
instructions in this manual to keep your machine in
good condition.
Do not alter or modify machine rashly, this may
impair function and effect service life or jeopardize
personal safety.
Caution: all safety information described in this
manual covers only basic safety information of this
machine. It’s not possible to predict every
circumstance which might involves potential hazards.
So it’s necessary to ask for instruction from your
superior before attempting any operation or
maintenance procedure.
(2) Engine Operation Label
Diesel engine inspection
Stop machine on level ground, inspect engine oil level
(stop engine for longer than 15 minutes to allow
engine oil to go back to the bottom), inspect dipstick
to make sure oil level must be between the lines of
“MIN” and “MAX”. For engine maintenance
To Next Page
Loading...
