SUNWARD SWE155F - Safety Operation Rules

OPERATION & MAINTENANCE MANUAL SWE155F
102
3.4.8 Safety Operation Rules
Safety rules on machine steering
 Place the idler underneath the cab and place
sprocket under counterweight. Only when idler
is under the cab, the direction of travel control
lever matches with that of machine traveling.
Otherwise, the direction is in reverse. i.e. if
sprocket is located under cab, push travel
control lever forward, machine will travel in
reverse.
 Before traveling, make sure the surrounding
area is clear of person and obstacles.
 Sound the horn to warn people before
traveling.
 Only operate the machine on the operator’s
seat.
 Do not carry other people with machine.
 Make sure door, windows are in lock up
position and locked securely.
 Do not travel in reverse if possible. swing
upper-structure for 180°. Before proceeding to
operate, slightly push handle to confirm the
relationship between handle operation and
travel direction.
 If the machine cannot swing due to confined
area, it’s necessary to offer a signal man to
assist operator.
Working on slopes
 Use machine to dig a platform as flat as
possible during operation on slopes. Then park
the machine on this platform to operate. Do not
directly stop the machine on a slope to operate.