SUNWARD SWE155F - 31 Waste Material Disposal; Prohibition of Unauthorized Modification on Machine; Safe Operation Instructions; Inspection before Starting Engine

OPERATION & MAINTENANCE MANUAL SWE155F
24
1.2.31Waste Material Disposal
 Observe local laws and regulations to dispose of waste
material, such as fuel, coolant etc.
1.2.32 Prohibition of Unauthorized Modification
on Machine
 Any unauthorized modification to machine may
involve hazards.
 SUNWARD disclaim any responsibility for damage,
injury or accidents arising from unauthorized
modification.
1.3 SAFE OPERATION INSTRUCTIONS
1.3.1 Inspection before Starting Engine
Before starting daily routine inspection, carry out the
following checks.
 Wipe off dust on glass window to secure visual field.
 Wipe off dust on the surface of front light and working
lamp, check to ensure they are properly functioning.
 Check coolant level, fuel level and oil level in engine
oil pan. Check air filter for clogging, check wiring for
damage.
 Adjust operator’s seat to a position where it is easy to
carry out operation. Check seat belt or mounting
clamps for damage or wear.
 Check meters to ensure they are functioning properly.
Check working lamp angle. Make sure control levers
are at neutral position.
 Check safe lock control levers to ensure they are in
LOCK (UP) position before starting engine.
 Adjust rear view mirror to a certain position where a
clear visual field of back machine is secured.
 Check upper or lower machine to ensure there is no
other persons or obstacles surrounding machine.
 In case there are any warning tags posted on control
lever, do not start or touch control lever.