SUNWARD SWE155F - Work Light Switch; Wiper Switch; Washer Switch

OPERATION & MAINTENANCE MANUAL SWE155F
77
3.2.13 Work light Switch
 Work light Switch is used to control headlight, working
light, and light for monitor.
 Set Work light Switch to ON position, machine’s front
light, working light, and monitor light will be electrified
and illuminated.
 Set switch to OFF position, the power for front light,
work light, monitor light will be cut down. Light will be
shut down.
3.2.14 Wiper Switch
 Wiper switch is used to control wiper located on front
window of the cab.
 Set the wiper switch to ON position to activate wiper.
 Set the wiper switch to OFF position to stop the wiper
and reset to original state.
3.2.15 Washer Switch
 Washer switch is used to control the washer for cab
front window.
 Set washer switch to ON position to activate the
washer.
 Set the switch to OFF position to stop the washer.