OPERATION & MAINTENANCE MANUAL SWE155F
(21) Life Hammer Label
(22) Emergency Exit Label
When accidents happen, and operator is
trapped in cab, operator can use life hammer
located on the side of cab to destroy window
labeled with exit mark to get out of the
machine.
The safety structure being damaged is beyond
repair. But you could have it replaced with a
new one.
Caution
Pay attention to the flying pieces while
breaking out emergency exit way. For
better protection of your safety, please
keep sufficient distance from exit way
being damaged.
Exit hole must be big enough for
operator to get out. Make sure your
safety.
To Next Page
