Supra eKey - Page 79

Page 74 Using the eKEY Application
in the KeyBox, however you must eSYNC to record the
change in KIMnet.
Setting a KeyBox to open during timed access hours
To change a KeyBox to open during the timed access hours
programmed into a KeyBox, complete this procedure.
1. Close your eKEY shell.
2. Press the
on button.
3. Highlight the
Program Key/Keybox option.
4. Press
enter .
5. Highlight the
Change Access Hours option.
6. Press
enter .
7. Enter the shackle code when prompted. The
Program Time sub-
menu displays with three options.
8. Press 2 to select the
Activate Daytime Hours option.
9. Insert the back of your eKEY into the KeyBox so that it fits snugly
inside the KeyBox receptacle. The gold contacts on the eKEY must
match the contacts on the KeyBox. A Successful Operation
message appears confirming the daytime hours the KeyBox can be
accessed.
Note: If you receive an error message see Appendix A: Error Codes for
help in determining how to correct the error.