PERIODIC MAINTENANCE 2-17
CLUTCH LOCK-UP INSPECTION
Perform this inspection to determine if the clutch is engaging fully
and not slipping.
• Connect a tachometer onto the spark plug lead.
• Start the engine.
• Apply the front and rear brakes as firmly as possible.
• Fully open the throttle for a brief period and note the maximum
engine speed sustained during the test cycle.
$ Lock-up speed: 2 500 – 2 900 r/min
!
Do not apply full power for more than 10 seconds or dam-
age to the clutch or engine may occur.
If the lock-up speed (r/min) does not coincide with the standard
range, inspect the following items for any abnormalities.
* Clutch shoes.........................................."3-17
* Clutch wheel .........................................."3-17
To Next Page
Loading...
