FUEL AND LUBRICATION SYSTEM 4-3
• Disconnect the fuel hose 1, and vacuum hose 2.
• Remove the fuel tank.
• Remove the fuel valve assembly.
FUEL FILTER INSPECTION AND CREANING
If the fuel filter is dirty with sediment or rust, fuel will not flow
smoothly and loss in engine power may result.
Clean the fuel filter with compressed air also check the fuel filter
for cracks.
!
Gasket and O-rings must be replaced with new ones to
prevent fuel leakage.
REMOUNTING
• Remount the fuel tank and fuel valve in the reverse order of
removal.
To Next Page
Loading...
