CHASSIS 5-17
• Remove the dust seals 1 and 2.
• Separate the tie rod ends 3, nuts 4, 5 and tie rods 6.
#
The lock nuts 4 have left hand threads.
INSPECTION
Inspect the removed parts for the following abnormallities.
* Handlebar distortion.
* Handlebar clamp wear.
DUST SEALS
Inspect the dust seals for wear or damage.
If any damages are found, replace the dust seals with new one.
KNUCKLE ARM BUSHING
• Insert the spacer into the bushing and inspect for abnormal
noise and smooth rotation while rotating the spacer.
If any damage are found, replace the bushing with new one.
SUSPENSION ARM
• Inspect the suspension arm and suspension arm bushing for
wear or damage. If any damages are found, replace the sus-
pension arm with a new one.
To Next Page
Loading...
