Suzuki LT-A750X/P - Page 171

Engine Mechanical: 1D-20
Cylinder Head
1) Remove the cam drive idle gear/sprocket (1) by
removing its shaft (2) with the idle shaft gasket (3)
and cam chain idle shim (4).
NOTE
Be careful not to drop the cam chain idle
shim (4) into the crankcase.
2) Remove the cylinder head bolts (M6) (5).
NOTE
Sightly loosen the cylinder nuts (6) to
facilitate later disassembly.
3) Remove the cylinder head bolts (M10) and washers.
NOTE
When loosening the cylinder head bolts,
loosen each bolt little by little diagonally.
4) Remove the cylinder head (7).
NOTE
If the cylinder head does not come off easily,
lightly tap using a plastic hammer.
Cylinder
1) Remove the dowel pins (1) and gasket (2).
2) Remove the cam chain guide (3).
3) Remove the cylinder (5) by removing the cylinder
nuts (4).
NOTE
If the cylinder does not come off easily,
lightly top using a plastic hammer.
1
2
3
4
I831G1140091-01
5
5
6
I831G1140186-01
7
I831G1140093-01
1
2
3
I831G1140096-01
5
4
I831G1140097-01