Suzuki LT-A750X/P - Page 385

Differential: 3B-25
4) Remove the O-ring (3) and final driven gear (4).
5) Remove the shim(s) (5).
6) Remove the oil seal (6) with the special tool.
Special tool
(A): 09913–50121 (Oil seal remover)
7) Remove the final driven gear bearing (7) with the
special tool.
NOTE
If there is no abnormal condition, the bearing
removal is not necessary.
Special tool
(B): 09913–70210 (Bearing installer set)
(C): 09944–66010 (Bearing installer)
8) Remove the shim(s).
9) Remove the oil seal (8) with the special tool.
Special tool
(A): 09913–50121 (Oil seal remover)
3
4
I831G1320095-01
5
I831G1320096-02
(A)
6
I831G1320097-01
(B)
(C)
7
I831G1320098-01
I831G1320099-01
(A)
8
I831G1320100-01