3B-26 Differential:
10) Remove the final driven gear bearing (9) with the
suitable tool.
NOTE
If there is no abnormal condition, the bearing
removal is not necessary.
11) Unlock the final drive stopper (10) with a chisel.
12) Remove the final drive stopper (11) with the special
tool.
Special tool
(D): 09924–41830 (Bearing retainer wrench)
13) Remove the final drive gear (12) and shim(s) (13).
14) Unlock the rear final drive nut (14) with a chisel.
15) Remove the final drive gear nut (14) with the special
tool.
Special tool
(E): 09924–52470 (Fixed final drive gear
holder)
(F): 09940–92430 (Rear axel wrench A)
16) Remove the washer (15).
9
I831G1320101-01
10
I831G1320102-01
(D)
11
I831G1320103-01
12
13
I831G1320104-01
14
I831G1320105-01
(E)
(F)
14
I831G1320106-02
15
I831G1320107-02
To Next Page
Loading...
