Differential: 3B-27
17) Remove the bearing (16) and the upper inner race
from the pinion gear with the special tool and
suitable tool.
NOTE
If there is no abnormal condition, the bearing
removal is not necessary.
Special tool
(G): 09913–61510 (Bearing puller)
18) Remove the lower inner race (17) with the special
tool.
Special tool
(H): 09913–60910 (Bearing remover)
19) Remove the final drive gear bearing (18) with the
special tool.
NOTE
If there is no abnormal condition, the bearing
removal is not necessary.
Special tool
(I): 09921–20240 (Bearing remover set)
Assembly
CAUTION
!
The removed oil seals, O-rings and bearings
must be replaced with new ones.
• Install the gear case bearing to the gear case with the
special tool.
Special tool
(A): 09913–70210 (Bearing installer set)
(B): 09924–84521 (Bearing installer set)
(G)
16
I831G1320108-01
(H)
17
I831G1320110-01
(I)
18
I831G1320111-01
(A)
(B)
I831G1320112-01
To Next Page
Loading...
