4A-4 Brake Control System and Diagnosis:
5) Remove the rear brake pedal shaft (3).
6) Remove the rear brake pedal (4) and rear brake
pedal spring (5).
7) Remove the dust seals (6) if necessary.
CAUTION
!
If there are wear or damage, replace the dust
seals (6) with new ones.
8) Remove the washers (7).
Installation
Install the rear brake pedal in the reverse order of
removal. Pay attention to the following points:
• Apply grease to the lip of dust seals and washers.
CAUTION
!
Never reuse the removed dust seals with new
ones.
: Grease 99000–25160 (Water resistance
grease or equivalent)
• Apply grease to the rear brake pedal shaft (1).
: Grease 99000–25160 (Water resistance
grease or equivalent)
4
3
5
I931G3410010-01
6
6
I931G3410004-01
7
I931G3410005-01
I931G3410006-02
1
I931H1410035-01
To Next Page
Loading...
