Suzuki LT-A750X/P - Page 708

Wiring Systems: 9A-5
“A”
1
(b)
(a)
3
5
4
8
6
14
13
16
17
15
7
9
12
“C”
18
10
“E”
“D”
2
11
11
“F”
VIEW F
VIEW A
19
“B”
I931G3910903-02
1. Starter motor 14. Injector coupler
2. Starter motor terminal 15. TP sensor coupler
3. Engine earth 16. ISC valve coupler
4. Clamp
: Bind the wiring harness and rear brake cable with the clamp.
17. TO sensor
5. Clamp
: Bind the wiring harness and diff-lock actuator lead wire with the clamp.
18. Horn (For P-17, 24)
6. Clamp
: Bind the diff-lock actuator lead wire and rear brake switch lead wire with the clamp.
19. IAP sensor
7. Clamp
: Bind the rear brake switch lead wire with the clamp.
“B”: To rear fender top.
8. Clamp
: Bind the wiring harness, generator lead wire and gear position switch lead wire.
“C”: Slack the read wire.
9. Speed sensor lead wire. “D”: Pass the horn lead wire inside of the stay.
10. Clamp “E”: Pass the branch of left headlight lead wire
over the radiator hose.
11. Clamp : 10 Nm (1.0 kgf-m, 7.0 lbf-ft)
12. Back up relay (For P-17) :6 Nm (0.6 kgf-m, 4.5 lbf-ft)
13. ECT sensor coupler