Suzuki LT-A750X/P - Page 709

9A-6 Wiring Systems:
3
“a”
5
7
8
9
10
11
12
“A”VIEW
4
2
4
2
LH RH
“C”
14
13
6
1
“A”
“D”
“B”
I931H1910903-05
1. Clamp
: Bind the left handlebar switch lead wire, rear brake lever switch lead wire,
horn lead wire (For P-17, 24) and emergency switch lead wire (For P-17) with
the clamp. Cut the tip of clamp after clamping.
10. ECM
2. Clamp
: Bind the combination meter lead wire, 2WD/4WD/diff-lock switch lead wire,
ignition switch lead wire, front brake switch lead wire, parking/rear brake lever
switch lead wire, left handlebar switch lead wire, horn lead wire (For P-17, 24)
and emergency switch lead wire (For P-17) with the clamp. Cut the tip of clamp
after clamping.
11. Fuse box
3. Clamp
: Bind the front brake switch lead wire and 2WD/4WD/diff-lock switch lead wire
with the clamp. Cut the tip of clamp after clamping.
12. Fuse (EPS)
4. Clamp
: Bind the combination meter lead wire, 2WD/4WD/diff-lock lead wire and front
brake switch lead wire with the clamp.
13. Combination meter lead wire
5. Horn button (For P-17, 24) 14. Ignition switch lead wire
6. Emergency switch (For P-17) “a”: 10 – 15 mm (0.4 – 0.6 in)
7. Drive relay “B”: Pass the combination meter lead wire behind the upper bracket.
8. Starter relay “C”: Slack the combination meter lead wire under the combination
meter.
9. Fuel pump relay “D”: Pass the front brake switch lead wire behind the handlebars.