3-62 ENGINE
• Install the C-ring
1 into the ring groove of the cylinder head.
• Align the engraved line marks
A on the camshaft so it is par-
allel with mating surface of the cylinder head and cylinder
head cover.
• Engage the cam chain on the camshaft sprocket with the
locating pin hole
B at just past top position.
NOTE:
Do not rotate the crankshaft while installing the camshaft or cam
chain.
• Install the lock washer
2 so that it is covering the locating pin.
NOTE:
Apply a small quantity of THREAD LOCK SUPER to the threads
of the camshaft sprocket bolts.
) 99000-32030: THREAD LOCK SUPER “1303”
• Tighten the camshaft sprocket bolts to the specified torque.
# Camshaft sprocket bolt: 11 N·m (1.1 kgf-m)
• Bend the lock washer securely.
2 Lock washer
3 Camshaft
4 Pin
5 Bolt
6 Camshaft sprocket
To Next Page
Loading...
