FUEL AND LUBRICATION SYSTEM 5-9
SPECIFICATIONS
LOCATION OF CARBURETOR I D. NO.
The carburetor I.D. is stamped on the location 1 on the carbure-
tor as shown in the right pho o.
ITEM
SPECIFICATION
E-02, 19, 24 E-03, 28 E-33
Carburetor type MIKUNI BDSR34 ←←
Bore size 34 mm ←←
I.D. No. 41F1 41F2 41F3
Idle r/min. 1 100 ± 100 r/min. ←←
Fuel level ———
Float height 7.0 ± 0.5 mm
←←
(2.76 ± 0.02 in)
Main jet (M.J.) #132.5 #
←
Main air jet (M.A.J.)
φ
1.8 ←←
Jet needle (J.N.) 5E22-3 5E23 ←
Needle jet (N.J.) P-0M
←
Throttle valve (Th.V.) #95 ←←
Pilot jet (P.J.) #27.5 #
←
Pilot screw (P.S.) PRE-SET
PRE-SET
←
(3.0 turns back)
Throttle cable play 2 – 4 mm
←←
(0.08 ± 0.16 in)
To Next Page
Loading...
