ENGINE 3-11
ENGINE DISASSEMBLY
• Remove the PAIR pipes.
• Remove the spark plugs.
% 09930-10121: Spark plug wrench set
• Remove the valve timing inspection plug 1 and the generator
cover cap 2.
• Position “RIT” mark on the generator with the center of the valve
timing inspection hole.
CYLINDER HEAD COVER
• Remove the intake pipe.
• Remove the inspection caps.
• Remove the cylinder head covers.
CAMSHAFT
• Flatten the lock washer.
• Remove the cam sprocket and camshaft. (Front and rear cylin-
ders)
To Next Page
Loading...
