CHASSIS 7-15
MASTER CYLINDER REMOVAL AND
DISASSEMBLY
• Place a rag underneath the brake hose union bolt on the mas-
ter cylinder to catch any spilt brake fluid. Remove the brake
hose union bolt and disconnect the brake hose.
!
Immediately wipe off any brake fluid contacting any part
of the motorcycle. The brake fluid reacts chemically with
paint, plastics, rubber materials, etc., and will damage
them severely.
• Disconnect the front brake light switch lead wire 1.
• Remove the right rear view mirror 2 and master cylinder as-
sembly 3.
• Remove the brake lever 4 and front brake light switch 5.
• Remove the reservoir cap 6 and diaphragm 7.
• Drain the brake fluid.
• Pull the dust boot 8 out and remove the circlip 9.
To Next Page
Loading...
