VL800/C/TK9 (’09-MODEL) 18-57
IGNITION SYSTEM
INSPECTION
IGNITION COIL PRIMARY PEAK VOLTAGE
(For E-02, 19, 24, 33)
• Remove the fuel tank. ( Page 14 93)
• Remove the frame head covers. ( Page 3-3)
• Disconnect the spark plug caps (Page 18-8)
• Connect new spark plugs to each spark plug cap and ground
them to the cylinder head.
NOTE:
Make sure that all couplers and spark plugs are connected prop-
erly and the battery used is in fully-charged condition.
ECM
TP
sensor
IAP
sensor 1
IAP
sensor 2
ECT
sensor
GP
swit h
Engine stop switch
Side-
stand
relay
Fuse
Fuse
Ignition
switch
Ignition coil
Spark plug
Battery
CKP
sensor
#1(sub)
#2(main)
#2(sub)
(E-02, 19, 24, 33 only)
(E-02, 19, 24, 33 only)
#1(main)
To Next Page
Loading...
