Suzuki VL800 - Cooling System Hose Routing

14-130 VL800K5 (’05-MODEL)
COOLING SYSTEM HOSE ROUTING
Hose clamp bolt tightening torque: 1.5 N·m (0.15 kgf-m, 1.0 lb-ft)
Pass through the breather hose between the frame and STVA.
Clamp
The clamp bolt head should face backward.
The ends of the clamp should face left side.
Align the clamp and white mark.
The clamp bolt head should face left side.
The clamp bolt head should face left side.
The clamp bolt head should face left side.
The ends of the clamp should face upside.
Marking (White)
Marking (White)
Marking (White)
Marking
Keep clearance.
Marking (Yellow)
The clamp bolt head should face left side.
Clamp the breather hose at the white mark.
Marking (Yellow)
The clamp bolt head
should face left side.
The clamp bolt head
should face right side.
45 ˚
17 N·m (1.7 kgf-m, 12.5 lb-ft)