VL800/C/TK9 (’09-MODEL) 18-81
FI SENSORS + SECONDARY THROTTLE VALVE ACTUATOR
THROTTLE BODY
ITEM SPECIFICATION NOTE
CKP sensor resistance 184 – 276 Ω
CKP sensor peak voltage 1.5 V and more When cranking
IAP sensor input voltage 4.5 – 5.5 V
IAP sensor output voltage Approx. 2.6 V at idle speed
TP sensor input voltage 4.5 – 5.5 V
TP sensor resistance Closed Approx. 1.1 kΩ
Opened Approx. 4.4 kΩ
TP sensor output voltage Closed Approx. 1.1 V
Opened Approx. 4.4 V
ECT sensor input voltage 4.5 – 5.5 V
ECT sensor resistance Approx. 2.45 kΩ at 20 C (68 °F)
IAT sensor input voltage 4.5 – 5.5 V
IAT sensor resistance Approx. 2.6 kΩ at 20 °C (68 °F)
TO sensor resistance 19.1 – 19.7 kΩ
TO sensor voltage Normal 0.4 – 1.4 V
Leaning 3.7 – 4.4 V
When leaning
65°
GP switch voltage 0.2 V and more From 1st to Top
Injector voltage Battery voltage
STP sensor input voltage 4.5 – 5.5 V
STP sensor resistance Closed Approx. 0.5 kΩ
Opened Approx. 3.9 kΩ
STP sensor output voltage Closed Approx. 0.5 V
Opened Approx. 3.9 V
STV actuator resistance Approx. 6.5 Ω
Heated oxygen sensor output
voltage
* 0.3 V and less at idle speed
For
E-02, 19, 24, 33
* 0.6 V and more at 5 000 r/min
Heated oxygen sensor resistance * 6.7 – 9.5 Ω at 23 °C (73.4 °F)
PAIR solenoid valve resis ance 20 – 24 Ω at 20 – 30 °C (68 – 86 °F)
ITEM SPECIFICATION
Bore size 34 mm
I.D. No. * 41F3 (For E-33), 41F2 (For the others)
Idle r/min 1 100 ± 100 r/min
Fast idle r/min 1 800 r/min (When cold engine)
Throttle cable play 2.0 – 4.0 mm
(0.08 – 0.16 in)
To Next Page
Loading...
