18-68 VL800/C/TK9 (’09-MODEL)
IGNITION COIL INSTALLATION
For E-02, 19, 24, 33
1 Ignition coil #1 (main)
2 Ignition coil #1 (sub) ITEM N·m
kgf-m
lbf-ft
3 Ignition coil #2 (main) A 4.5 0.45 3.5
4 Ignition coil #2 (sub)
5 Protector
A Ignition coil bolt
*1
When installing the rear ignition coil bracket, temporarily tighten the
bolts a and b first.
*2
Pass the spacer to the hole c of protector securely. Do not pinch the
spacer between the protector and frame.
*3 Do not contact the plug cap with cylinder head cover cap.
*1
FWD
0 ± 10˚ 0 ± 10˚
*2
*3
*3
To Next Page
Loading...
