2-20 PERIODIC MAINTENANCE
CHASSIS BOLTS AND NUTS
Check that all chassis bolts and nuts are tightened to their specified torque. The locations of the following nuts
and bolts on the motorcycle.
Item N
.
m kgf
.
m Ib-ft
1 Steering stem head nut 90 9.0 65.0
2 Steering stem lock nut 80 8.0 58.0
3 Front fork lower clamp bolt 33 3.3 24.0
4 Front fork cap bolt 35 3.5 25.5
5 Front axle 65 6.5 47.0
6 Front axle pinch bolt 33 3.3 24.0
7 Handlebar set bolt 70 7.0 50.5
8 Handlebar clamp bolt 23 2.3 16.5
9 Front brake master cylinder mounting bolt 10 1.0 7.0
0 Front brake caliper mounting bolt 39 3.9 28.0
A Brake hose union bolt 23 2 3 16.5
B Caliper air bleeder valve 8 0.8 6.0
C Brake disc bolt 23 2.3 16.5
D Swingarm pivot nut 100 10.0 72.5
E Torque link bolt and nut (Front) 35 3.5 25.5
F Torque link bolt and nut (Rear) 25 2.5 18.0
G Rear shock absorber mounting bolt/nut
50 5.0 36.0
(Upper & Lower)
H Rear cushion lever/rod mounting nut 78 7.8 56.5
I Rear axle nut 65 6.5 47.0
J Brake cam lever nut 10 1.0 7.0
To Next Page
Loading...
