18-90 VL800/C/TK9 (’09-MODEL)
FUEL SHUT-OFF VALVE
Inspect the fuel shut-off valve body for damage.
Inspect the fuel shut-off valve operation in the following proce-
dure.
• Remove the right frame cover. (Page 7-2)
• Remove the purge control solenoid valve bracket.
(Page 18-86)
• Remove the fuel shut-off valve from the purge control sole-
noid valve bracket.
• When air is blown into the fuel shut-off valve with its side A
positioned upward, the air can pass through to the canister
side.
• When air is blown into the fuel shut-off valve with its side A
positioned sideways, the air cannot pass through to the canis-
ter side.
• If the fuel shut-off valve operates otherwise, it must be
replaced.
* Gasoline and gasoline vapor is toxic. A small amount
of fuel remains in the fuel shut-off valve when check-
ing it.
* Do not swallow the fuel when blowing the fuel shut-
off valve.
To Next Page
Loading...
