Suzuki VL800 - EVAPORATIVE EMISSION CONTROL SYSTEM INSPECTION (Only for E-33); Evap System Purge Control Solenoid Valve; HEATED OXYGEN SENSOR (HO2 S) INSPECTION (for E-02, 19, 24, 33); Pair (Air Supply) System Inspection

18-88 VL800/C/TK9 (’09-MODEL)
PAIR (AIR SUPPLY) SYSTEM INSPECTION
HOSES
 Page 14-122
PAIR REED VALVE
 Page 14-122
PAIR CONTROL SOLENOID VALVE
 Page 14-123
HEATED OXYGEN SENSOR (HO2S) INSPECTION
(For E-02, 19, 24, 33)
Page 18-33
EVAPORATIVE EMISSION CONTROL SYSTEM INSPECTION
(Only for E-33)
HOSES
VL800K6 Page 14-124
EVAP CANISTER
Page 14-124
EVAP SYSTEM PURGE CONTROL
SOLENOID VALVE
REMOVAL
• Remove the right frame cover (Page 7-2)
• Disconnect the purge control solenoid valve coupler 1 and
hoses 2.
• Remove the purge control solenoid valve bracket bolt 3 and
disconnect the hoses 4.