Suzuki VL800 - Brake Pad Replacement

7-10 CHASSIS
BRAKE PAD REPLACEMENT
• Remove the guide hook A.
• Remove the brake caliper by removing the brake caliper mount-
ing bolts.
• Remove the pin 1.
• Remove the pad pin 2.
• Remove the brake pads 3.
!
* Do not operate the brake lever during or afte br ke
pad removal.
* Replace the brake pads as a set, otherwise braking per-
formance will be adversely affected.
• Install the new brake pads.
• Tighten the brake caliper mounting bolts to the specified torque.
$ Brake caliper mounting bolts: 39 N
.
m (3.9 kgf
.
m, 28 lb-ft)
• Install the guide hook A.
NOTE:
After replacing the brake pads, pump the brake lever a few times
to check for proper brake operation and then check the brake
fluid level.