VL800K5 (’05-MODEL) 14-129
CABLE ROUTING
Clutch
cable *3
Cable guide *1
Wiring harness
Throttle cable clamp
Cable guide
Throttle cable No.1
(Pulling cable)
Throttle cable No.2
(Returning cable)
Brake
hose
Wiring
harness
White
tape
Clutch
cable *4
Clutch cable
Clamp
Clamp
Clamp
High-tension cord
Cushion
Clutch cable
*2
High-tension cord
Wiring
harness
Clutch
cable
Throttle
cable No.2
Throttle
cable No.1
Throttle cable No.1
Throttle cable No.2
Wiring harness
0 – 2 mm (0 – 0.08 in)
200 mm
(7.9 in)
40 mm
(1.6 in)
Clutch cable
Clamp
0 – 2 mm
(0 – 0.08 in)
*1
Pass through the clutch cable and
throttle cable inside the wiring har-
ness.
*3
Clamp the clutch cable on the frame
with the cable’s white tape brought to
the recess of the frame.
*2
Clamp the high-tension cord immedi-
ately on the side of the cushion.
*4
The clutch cable must be contacted
with the cushion when clamped.
To Next Page
Loading...
