3-10 ENGINE
• Install the gearshift lever and the footrest in the correct posi-
tion.
" Gearshift lever height A
Standard: 90 mm (3.5 in)
• Apply grease to the push rod and install it.
# 99000-25030: SUZUKI SUPER GREASE “A” (For USA)
99000-25010: SUZUKI SUPER GREASE “A”
(For the others)
• Apply grease to the clutch release mechanism and install it.
# 99000-25030: SUZUKI SUPER GREASE “A” (For USA)
99000-25010: SUZUKI SUPER GREASE “A”
(For the others)
" Clutch release screw
Standard: $ turn back
CLUTCH CABLE ADJUSTMENT!2-12
• Install the new gaskets.
• Install the exhaust pipes and mufflers
• Apply gas sealer to the exhaust pipe connecters.
EXHAUST GAS SEALER: PERMATEX 1372
• Adjust the following items.
* Engine oil !2-8
* Engine coolant !2-13
* Idling adjustment !2-10
* Throttle cable play !2-11
* Rear brake pedal height !2-16
To Next Page
Loading...
