CHASSIS 7-7
REASSEMBLY AND REMOUNTING
Reassemble and remount the front wheel in the reverse order of
removal and disassembly. Pay special attention to the following
points:
WHEEL BEARING
• Apply SUZUKI SUPER GREASE “A” to the bearings before in-
stalling.
For USA
' 99000-25030: SUZUKI SUPER GREASE “A”
For the other countries
' 99000-25010: SUZUKI SUPER GREASE “A”
• Install the wheel bearings using the used bearings and special
tool as described below.
% A 09941-34513: Bearing installer set
B 09913-70210: Bearing installer set (40 mm)
!
* First install the right wheel bearing, then install the left
wheel bearing.
* The sealed covers on the bearings must face to the
outside.
BRAKE DISC
• Make sure that the brake disc is clean and free of any grease.
Apply THREAD LOCK SUPER “1360” to the brake disc bolts
and tighten them to the specified torque.
(99000-32130: THREAD LOCK SUPER “1360”
$ Brake disc bolt: 23 N
.
m (2.3 kgf
.
m, 16.5 lb-ft)
Left
Right
Left
Right
Clearance
To Next Page
Loading...
