7-20 CHASSIS
• Remove the front fork inner tube cover 1, washer 2 and rub-
ber 3.
• Remove the inner tube cover stopper 4 by loosening the bolt.
• Remove the inner tube cover guide 5.
• Remove the front fork spring stopper nut 6 and fork spring 7.
% 09900-18720: Hexagon socket (14 mm)
• Invert the front fork and stroke it several times to drain out fork
oil.
• Hold the front fork in the inverted position for a few minutes to
allow fork oil to fully drain.
• Remove the damper rod bolt using a -mm hexagon wrench
and the special tools.
% 09940-34520: “T” handle
09940-34531: Attachment A”
• Remove the damper rod 8 and Rebound spring 9.
To Next Page
Loading...
