CHASSIS 7-23
NOTE:
When installing the oil lock piece, insert the tapered end
A
of oil
lock piece into the inner tube.
• Insert the inner tube into the outer tube and install the oil seal
1 using the special tool.
% 09940-52861: Front fork oil seal installer
• Install the oil seal stopper ring 2.
!
Make sure that the oil seal stopper ring is fitted securely.
• Install the dust seal 3.
DAMPER ROD
• Install the damper rod 4 and rebound spring 5 as shown.
Tighten the damper rod bolt to the specified torque using a 6-mm
hexagon wrench and the special tools.
% 09940-34520: “T handle
09940-34531: Attachment “A”
$ Damper rod bolt: 20 N
.
m (2.0 kgf
.
m, 14.5 lb-ft)
!
Use a new damper rod bolt gasket 6 to prevent oil leak-
age.
To Next Page
Loading...
