8-30 ELECTRICAL SYSTEM
Inspect each switch for continuity with a tester. If any
abnormality is found, replace the respective switch
assemblies with new ones.
IGNITION SWITCH
(For E-24)
R O O/Y B/W
ON
OFF
LOCK
Color
Position
(For Others)
R O O/Y B/W Gr Br
ON
OFF
LOCK
P
Color
Position
LIGHTING SWITCH
(Except for E-03, 24, 28 and 33)
O/Bl Gr O/R Y/W
OFF
( )
S
(
)
ON
(
)
Color
Position
DIMMER SWITCH
W Y Y/W
HI
(
)
LO
(
)
Color
Position
TURN SIGNAL SWITCH
Lg Lbl B
L
PUSH
R
Color
Position
PASSING LIGHT SWITCH
(Except for E-03, 28 and 33)
O/R Y
PUSH
Color
Position
ENGINE STOP SWITCH
O/B O/W
OFF
(
)
RUN
(
)
Color
Position
STARTER BUTTON
O/W Y/G
PUSH
Color
Position
HORN BUTTON
B/Bl B/W
PUSH
Color
Position
FRONT BRAKE SWITCH
B/R B
OFF
ON
Color
Position
REAR BRAKE SWITCH
CLUTCH LEVER POSITION SWITCH
B/Y B/Y
OFF
ON
Color
Position
OIL PRESSURE SWITCH
Color
Position
G/Y Ground
ON (engine
is stopped)
OFF (engine
is running)
NOTE:
Before inspecting the oil pressure switch, check if the
engine oil level is enough. (
&
2-8)
WIRE COLOR
B : Black Lbl : Light blue R : Red
Br : Brown Lg : Light green Y : Yellow
Gr : Gray O : Orange W : White
B/Bl : Black with Blue tracer
B/W : Black with White tracer
B/Y : Black with Yellow tracer
B/R : Black with Red tracer
G/Y : Green with Yellow tracer
O/B : Orange with Black tracer
O/Bl : Orange with Blue tracer
O/R : Orange with Red tracer
O/W : Orange with White tracer
O/Y : Orange with Yellow tracer
Y/G : Yellow with Green tracer
Y/W : Yellow with White tracer
Terminal Terminal
OFF
ON
Color
Position