Suzuki VL800 - Page 297

SERVICING INFORMATION 9-31
OIL PUMP
ITEM STANDARD LIMIT
Oil pressure (at 60°C,140°F) Above 350 kPa (3.5 kgf/cm
2
, 50 psi)
Below 650 kPa (6.5 kgf/cm
2
, 92 psi) ———
at 3 000 r/min.
CLUTCH Unit: mm (in)
ITEM STANDARD LIMIT
Clutch cable play 10 – 15
(0.4 – 0.6)
———
Clutch release screw 1/4 turn back
Drive plate thickness
No.1
2.92 – 3.08 2.62
(0.115 – 0.121) (0.103)
No.2
3.42 – 3.58 3.12
(0.135 – 0 141) (0.123)
Drive plate claw width 15.9 – 16.0 15.1
(0.626 – 0.630) (0.594)
Driven plate distortion
———
0.10
(0.004)
Clutch spring free length 49.2 46.8
(1 94) (1.84)
TRANSMISSION Unit: mm (in) Except ratio
ITEM STANDARD LIMIT
Primary reduction ratio 1.690 (71/42) ———
Secondary reduction ratio 1.133 (17/15) ———
Final reduction ratio 3.090 (34/11) ———
Gear ratios Low 2.461 (32/13) ———
2nd 1.631 (31/19) ———
3rd 1.227 (27/22) ———
4th 1.000 (25/25) ———
Top 0.814 (22/27) ———
Shift fork to groove clearance
No.1
0.10 – 0.30 0.50
(0.004 – 0.012) (0.020)
No.2
0.10 – 0.30 0.50
(0.004 – 0.012) (0.020)
Shift fork groove width
No.1
5.50 – 5.60
(0.217 – 0.220)
———
No.2
4.50 – 4.60
(0.177 – 0.181)
———
Shift fork thickness
No.1
5.30 – 5.40
(0.209 – 0.213)
———
No.2
4.30 – 4.40
(0.169 – 0.173)
———