11-2 VL800K2 (’02-MODEL)
SPECIFICATIONS
DIMENSIONS AND DRY MASS
Overall length................................................................ 2 510 mm (98.818 in)
Overall width ................................................................. 985 mm (38.779 in)
Overall height................................................................ 1 110 mm (43.700 in)
Wheelbase .................................................................... 1 650 mm (64.960 in)
Ground clearnce ........................................................... 140 mm ( 5.511 in)
Seat height.................................................................... 700 mm (27.559 in)
Dry mass....................................................................... 239 kg (53.727 lbs)
ENGINE
Type............................................................................... Four-stroke, Liquid-cooled, OHC
Number of cylinders...................................................... 2
Bore .............................................................................. 83 mm (3.268 in)
Stroke............................................................................ 74.4 mm (2.929 in)
Displacement ................................................................ 805 cm
3
(49.1 cu in)
Compression ratio......................................................... 9.4 : 1
Carburetor..................................................................... BDSR34
Air cleaner..................................................................... Non-woven fabric element
Starter system............................................................... Electric
Lubrication system........................................................ Wet sump
Idle speed ..................................................................... 1 100 ± 100 r/min
TRANSMISSION
Clutch....................................................................... .. Wet multi-plate type
Transmission ...................................................... .. 5-speed, constant mesh
Gearshift pattern ............................................... .... ... 1-down, 4-up
Primary reduction ratio ............................. ............ ..... 1.690 (71/42)
Secondary reduction ratio ...................... ...... ............ 1.133 (17/15)
Final reduction ratio ........................... .. ............ 3.090 (34/11)
Gear ratios, Low ............................... .... .................. 2.461 (32/13)
2nd......................... ......... ..................... 1.631 (31/19)
3rd .................... . ....... ........................ 1.227 (27/22)
4th.......................... .... ........................... 1.000 (25/25)
Top .................... ... ............................... 0.814 (22/27)
Drive system .................... ...... .................................. Shaft drive
To Next Page
Loading...
