VL800K2 (’02-MODEL) 11-11
R + M
2
Use only unleaded gasoline of at least 87 pump
octane or 91 octane ( ) or higher rated by the
Research Method.
Gasoline containing MTBE (MethyI Tertiary ButyI
Ether), less than 10% ethanol, or less than 5%
methanol with appropriate cosolvents and corro-
sion inhibi or is permissible.
Gasoline used should be graded 91 octane or
higher. An unleaded gasoline is recommended.
TIRE Unit: mm (in)
ITEM STANDARD/SPECIFICATION LIMIT
Cold inflation tire pressure
Front
200 kPa
———
(Solo riding) (2.00 kgf/cm
2
, 29 psi)
Rear
250 kPa
———
(2.50 kgf/cm
2
, 36 psi)
Cold inflation tire pressure
Front
200 kPa
———
(Dual riding) (2.00 kgf/cm
2
, 29 psi)
Rear
250 kPa
———
(2.50 kgf/cm
2
, 36 psi)
Tire size Front 130/90-16 67H or 130/90-16M/C 67H ———
Rear 170/80-15 M/C 77H ———
Tire type Front IRC GS-23F ———
Rear IRC GS-23R ———
Tire tread depth
Front ———
1.6
(0.06)
Rear ———
2.0
(0.08)
FUEL + OIL + COOLANT
ITEM SPECIFICATION NOTE
Fuel type
E-03, 28, 33
Other models
Fuel tank including reserve 17.0 L
(4.5/3.7 US/lmp gal)
reserve 1.5 L
(flicker) (0.4/0.3 US/lmp gal)
Engine oil type SAE 10W/40, API SF or SG
Engine oil capacity
Change
3 000 ml
(3.2/2.6 US/lmp qt)
Filter change
3 400 ml
(3.6/3.0 US/lmp qt)
Overhaul
3 700 ml
(3.9/3.3 US/lmp qt)
Final bevel gear oil type SAE 90 hypoid gear oil
with GL-5 under API classification
Final bevel gear oil capacity 200 – 220 ml
(6.8/7.0 – 7.4/7.7 US/lmp oz)
Brake fluid type DOT 4
Coolant capacity 1 500 ml
(1.6/1.3 US/lmp qt)
To Next Page
Loading...
