Suzuki VL800 - Page 322

12-2 VL800K3 (’03-MODEL)
SPECIFICATIONS
DIMENSIONS AND DRY MASS
Overall length....................................................... 2 510 mm (98.8 in)
Overall width ........................................................ 985 mm (38.7 in)
Overall height....................................................... 1 100 mm (43.3 in)
Wheelbase........................................................... 1 655 mm (65.2 in)
Ground clearnce .................................................. 140 mm ( 5.5 in)
Seat height........................................................... 700 mm (27.6 in)
Dry mass.............................................................. 241 kg (53.1 lbs)
ENGINE
Type..................................................................... Four-stroke, Liquid-cooled, OHC
Number of cylinders............................................. 2
Bore ..................................................................... 83 mm (3.268 in)
Stroke................................................................... 74.4 mm (2.929 in)
Displacement .......................................................... 805 cm
3
(49.1 cu. in)
Compression ratio................................................ 9.4 : 1
Carburetor............................................................ BDSR34
Air cleaner............................................................ Non-woven fabric element
Starter system...................................................... Electric
Lubrication system............................................... Wet sump
Idle speed ............................................................ 1 100 ± 100 r/min
TRANSMISSION
Clutch................................................................ Wet multi-plate type
Transmission.................................................... . 5-speed, constant mesh
Gearshift pattern .................................................. 1-down, 4-up
Primary reduction ratio............................ ..... .... 1.690 (71/42)
Secondary reduction ratio....................... ........... 1.133 (17/15)
Final reduction ratio .......................... .... ........... 3.090 (34/11)
Gear ratios, Low......................... .......... ............ 2.461 (32/13)
2nd...................... . ..... .............. 1.631 (31/19)
3rd .......................... ..... ................. 1.227 (27/22)
4th..................... .... ..................... 1.000 (25/25)
Top ............. ....... ......................... 0.814 (22/27)
Drive system ............ .......................................... Shaft drive