13-10 VL800K4 (’04-MODEL)
TIRE
Unit: mm (in)
FUEL + OIL + COOLANT
ITEM STANDARD/SPECIFICATION LIMIT
Cold inflation tire pressure
(Solo riding)
Front
200 kPa
(2.00 kgf/cm
2
, 29 psi)
—
Rear
250 kPa
(2.50 kgf/cm
2
, 36 psi)
—
Cold inflation tire pressure
(Dual riding)
Front
200 kPa
(2.00 kgf/cm
2
, 29 psi)
—
Rear
250 kPa
(2.50 kgf/cm
2
, 36 psi)
—
Tire size Front 130/90-16M/C 67H —
Rear 170/80-15 M/C 77H —
Tire type Front IRC GS-23F —
Rear IRC GS-23R —
Tire tread depth
Front —
1.6
(0.06)
Rear —
2.0
(0.08)
ITEM SPECIFICAT ON NOTE
Fuel type Use only unleaded gasoline of at least 87 pump
octane or 91 octane (R/2 + M/2) or higher rated by
the Research Method.
Gasoline containing MTBE (Methyl Tertiary Butyl
Ether), less than 10% ethanol, or less than 5%
methanol with appropriate cosolvents and corro-
sion inhibitor is permissible.
E-03, 28, 33
Gasoline used should be graded 91 octane or
higher An unleaded gasoline is recommended.
Other models
Fuel tank including reserve 17.0 L
(4.5/3.7 US/lmp gal)
reserve
(flicker)
1.5 L
(0.4/0.3 US/lmp gal)
Engine oil type SAE 10W-40, API SF or SG
Engine oil capacity
Change
3 000 ml
(3.2/2.6 US/lmp qt)
Filter
change
3 400 ml
(3.6/3.0 US/lmp qt)
Overhaul
3 700 ml
(3.9/3.3 US/lmp qt)
Final bevel gear oil type SAE 90 hypoid gear oil with
GL-5 under API classification
Final bevel gear oil capacity 200 – 220 ml
(6.8/7.0 – 7.4/7.7 US/lmp oz)
Brake fluid type DOT 4
Coolant capacity 1 500 ml
(1.6/1.3 US/lmp qt)
To Next Page
Loading...
