18-6 VL800/C/TK9 (’09-MODEL)
MAINTENANCE AND TUNE-UP PROCEDURES
This section describes the servicing procedures for each Peri-
odic Maintenance item which differ from those of the VL800K6
(’06-MODEL).
For details other than the following items, refer to the VL800
Service Manual.
AIR CLEANER
• Remove the air cleaner box mounting bolts 1.
: Hooked part
• Loosen the clamp screw 2.
• Disconnect the PAIR hose 3 and IAT sensor coupler 4.
• Remove the air cleaner case 5
Inspect every 6 000 km (4 000 miles, 12 months) and
replace every 18 000 km (11 000 miles, 36 months).
To Next Page
Loading...
