VL800/C/TK9 (’09-MODEL) 18-9
• Place a rug on the cylinder head cap 2.
• Open the cylinder head cover cap 2 as shown.
• Disconnect the spark plug caps 3.
• Remove the spark plugs 4 with the special tools.
09930-10121: Spark plug socket wrench set
09930-14530: Universal joint
NO.1 (REAR) SPARK PLUG REMOVAL (For E-03, 28)
Page 2-4
HEAT RANGE
• Check spark plug heat range by observing electrode color. If it
is white or glazed appearing, replace the spark plug with
colder type one.
(For E-02, 19, 24, 33)
(For E-03, 28)
CARBON DEPOSITS
• Check carbon deposits on the spark plug.
• If carbon is deposited, remove it using a spark plug cleaner
machine or carefully use a tool with a pointed end.
The hot engine can burn you. Wait until the engine are
cool enough to touch.
Standard Cold type
NGK DR7EA DR8EA
DENSO X22ESR-U X24ESR-U
Standard Cold type
NGK DPR7EA 9 DPR8EA-9
DENSO X22EPR-U9 X24EPR-U9
To Next Page
Loading...
