Sycamore DNX-11 - User Manual

DNX Series Multiservice Cross-Connect
Quick Install & Setup Guide
DOC-001-11001
Revision 006
February 2008
Inside ...
Provides instructions for:
 Inspecting equipment
 Part descriptions
 Hardware installation/setup
 Powering up the system.

Summary

Prior to Installation

DNX-11 Installation

Installing DNX-11 Power Supply Module(s)

Step-by-step guide for installing power supply modules into the DNX-11.

DNX-11 AC Power

Details on AC power connection, requirements, and fuses for the DNX-11.

DNX-11 DC Power

Details on DC power connection, requirements, and fuses for the DNX-11.

Connecting the Talk Battery or Signal Battery

Installing the System Manager Controller

Guide for installing the SMC II module into the DNX-11 chassis.

SMC II Module Jumper Configuration

Installing Application & Interface Modules

Steps for installing application and interface modules into the DNX-11.

Connecting External Clocking

PSX-5300 Installation

Rack Mounting

Proper Grounding

Procedures for grounding the PSX-5300 via rack mount or grounding strap.

PSX-5300 DC Power

Requirements and fuse information for connecting DC power to the PSX-5300.

PSX Module Installation and Cable Connection

Procedures for installing PSX modules and connecting interface cables.

Narrowband Cable Connections

Broadband Cable Connections

Connecting N+1 Protection Switch DC Power (-48 VDC)

Detailed steps for connecting -48VDC power to the PSX-5300.

Console Management Access

Logging into the DNX

Install IP Address

Port IP Address Configuration

Verifying Protection Switch Installation

Verify the Protection Switch Installation

Sycamore DNX-11 Specifications

General

Brand	Sycamore
Model	DNX-11
Category	Network Hardware
Language	English