Console Management Access PSX Module Installation and Cable Connection
DOC-001-11001 (Rev. 006)
40 DNX Quick Install & Setup Guide
Logging into the DNX
1. Press <Enter> on your terminal keyboard to activate automatic baud rate recognition
(ABR).
2. Enter your login name and password. To use the default login name and password, press
<Enter>
for each entry.
Note: Once a login name and password has been established, the default login (Enter) is no
longer valid. The Admin user level should establish the first login name and password
entry on the User Menu. For more details on the various security levels, refer to
“System Security” on page 41.
3. If the DNX System Manager cannot automatically detect your terminal type, the Terminal
Selection Menu displays. Select your terminal type from the list. Refer to the screen below.
4. Once the terminal type has been automatically detected or manually selected, the DNX
Main Menu displays.
Figure 29: Terminal Selection Type.
login:
password:
WELCOME...
Thu, Oct 30, 2003 15:38:53pm
os: 3.0
Terminal types supported:
(1) ADDS Regent 25 (11) Hazeltine 1500
(2) ADDS Viewpoint (12) IBM 3101
(3) Attis 4410/4425 (13) ICL 6401
(4) Data General DASHER (14) LSI ADM 11/31
(5) Datamedia 1521 (15) Paradyne 7811
(6) Datamedia EXCEL 30 (16) Qume QVT-101/102/108
(7) Datamedia EXCEL 42 (17) Teletype 5410/5425
(8) DEC VT-52 (18) Televideo 900
(9) DEC VT-100/131/220 (19) Wyse WY-50
(10) Freedom 100 (20) Wyse WY-75
Enter your terminal type [1..20]...
To Next Page
Loading...
