16. REAR BRAKE & REAR WHEEL & REAR CUSHION
16-8
Installation
Install rear wheel axle and driven sprocket holder.
Install rear brake disk bracket and disk.
Install rear wheel axle nuts, rear axle nut fixed
plate and tighten the nuts.
Torque: 9.2kgf-m
Special tool:
Tool number：SYM-HT06007
Tool name：rear axle nut wrench (55mm)
Tool number：SYM-4230200-RB1 RFA.
Tool name：rear axle nut socket.
After tightened the axle nut, bend the rear axle nut
fixed plate.
To this chapter contents
Fixed plate
Driven sprocket holder
Brake disk bracket
To Next Page
Loading...
