Symmetricom TimeProvider 1100 Reference Guide

097-58001-01 Revision E – September 2006 TimeProvider TL1 Reference Guide 123
Chapter 2 TL1 Command Syntax and Description
Retrieve Sync (RTRV-SYNC)
Retrieve Sync (RTRV-SYNC)
This command retrieves equipment parameters associated with provisioning of the
synchronization interfaces for the system inputs and outputs.
This command has a default access level of USER.
Syntax
RTRV-SYNC:[<tid>]:<aid>:[<ctag>]::<keyword>;
Parameter Value
Description
See Table 2-6 for <keywords> and descriptions of their
possible <values>.
<aid> SYS The command’s effect is on system-level input settings.
GPS The command’s effect is on the GPS system input.
PRS The command’s effect is on the PRS system input.
INPp The command’s effect is on the input port specified by p:
 p = “1” for the input marked INP 1 on the Input
Connector module
 p = “2” for the input marked INP 2 on the Input
Connector module
OUTg The command’s effect is on the output group specified by g:
 g = “A” for the group marked “A” on the main shelf
 g = “B” for the group marked “B” on the main shelf
 g = “C” for the group marked “C” on the main shelf
 g is “D” for the group marked “D” on the main shelf
RTMg[-p] The command’s effect is on the Retimer group and port
specified by g[-p]:
 g = “A” for the group marked “A” on the main shelf
 g = “B” for the group marked “B” on the main shelf
 g = “C” for the group marked “C” on the main shelf
 g = “D” for the group marked “D” on the main shelf
 p = “1” for Port 1 on the Retimer module
 p = “2” for Port 2 on the Retimer module
E422g The command’s effect is on the EIA-422 output group
specified by g:
 g = “A” for the group marked “A” on the main shelf
 g = “B” for the group marked “B” on the main shelf
 g = “C” for the group marked “C” on the main shelf
 g is “D” for the group marked “D” on the main shelf

Symmetricom TimeProvider 1100 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1100
Category	Clock
Language	English